12.5G 24 x 24 Crosspoint

The M21024/M21036/M21048 family of devices is made up of fully non-blocking asynchronous crosspoint switches that operate at all data rates from 100 Mbps to 12.5 G. The three products provide superior signal integrity management capabilities through the switch core and at the IO. Each device receiver is equipped with an analog equalizer that is programmable and designed to equalize over 27 dB of insertion loss at 5.6 GHz. The M21024/M21036/M21048 switch core is equipped with a sophisticated servo that automatically manages the DC offset in each channel in order to minimize jitter caused by duty cycle distortion. The output stages of the device are equipped with individually programmable drivers that operate with up to 10.5 dB of de-emphasis as well as a wide range of output voltage swing levels. Additionally, the products are equipped with features to assist with channel bring-up and performance monitoring. The first of these features is a pattern generator and checker that can be used for pass/fail testing with a variety of test patterns. The second monitoring feature is a jitter measurement tool that enables the system to individually monitor jitter on any channel. Those features can also be used to configure each input equalizer for fully optimized performance. The M21024/M21036/M21048 offers many different control plane interfaces for maximum flexibility. These control interfaces include options for 2-wire and 8-bit parallel bus as well as 4-wire. It is also possible for the device to automatically load a configuration from an external EEPROM.