MD-160-PIN
(non-RoHS) Termination Insensitive
The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match and also absorb mixer generated LO frequency terms. Combined, these features give the mixer its insensitivity to external mismatches, plus superior VSWR.
Product Specifications
- Part Number
- MD-160-PIN
- Description
- (non-RoHS) Termination Insensitive
- Min Frequency, RF/LO(MHz)
- 1.00
- Max Frequency, RF/LO(MHz)
- 1500.00
- Min Frequency, IF(MHz)
- 1.00
- Max Frequency, IF(MHz)
- 1000.00
- LO Drive(dBm)
- 13
- Conversion Loss(dB)
- 9.00
Features
- Third Order Intermodulation Ratio is Insensitive to Port Mismatches
- MIL-STD-883 Screening Available
- Maximum Input Power: 350 mW Max @ 25°C, Derated to 85°C @ 3.5 mW/°C
- Impedance: 50 Ohms Nominal
- VSWR: Typically Less than 1.5:1 @ Midband
- Conversion Loss: 7 dB Typical Midband
Applications
- Aerospace and Defense
- ISM